Abstract
This study reveals the impact of the activation with microwave and conventional heating sources on textural properties and CO2 uptake of a mixed plastic-based char. Two mixed plastic-based adsorbents, one activated using microwaves and the other using conventional heating, were produced at optimum activation conditions, and subsequently compared. The findings show that both heating sources produced microporous adsorbents, but activation heating sources influenced their physicochemical properties and CO2 uptake. The microwave-produced activated carbon (AC) displayed superior BET surface area, total, micro- and ultra-micropore volumes compared to the conventionally produced AC. The microwave-produced AC possessed CO2 adsorption capacities of 1.66 and 2.37 mmol/g under dynamic and equilibrium conditions, respectively, at 25o 19 C and 1 bar. These capacities represent an 8 and 30% higher uptake, respectively, compared to the 1.53 and 1.66 mmol/g displayed by the conventionally prepared AC under the same adsorption conditions. Both samples displayed stable and excellent CO2 recyclability over 10 adsorption-desorption cycles, with desorption efficiencies ranging from 93.46 to 96.72% (microwave- and conventionally- produced ACs respectively). The Avrami model most accurately described the experimental CO2 adsorption data under dynamic conditions, while the Sip model gave the best fit for equilibrium conditions. These findings apply to both types of ACs at various temperatures, irrespective of the heating source. Overall microwave heating is more efficient
than conventional heating, requiring 300°C lower temperature, 115 minutes shorter time, 0.79 kWh less energy, and less KOH. It improves CO2 uptake and reduces production costs by 80%, offering a sustainable alternative for CO2 adsorbent production.
than conventional heating, requiring 300°C lower temperature, 115 minutes shorter time, 0.79 kWh less energy, and less KOH. It improves CO2 uptake and reduces production costs by 80%, offering a sustainable alternative for CO2 adsorbent production.
Original language | English |
---|---|
Journal | Journal of CO2 Utilization |
Publication status | Accepted/In press - 30 Sept 2024 |
Keywords
- Mixed plastic
- microwave activation
- thermal activation
- heating sources
- carbon capture
- activated carbons